Your board-compliant seal will be ready for download after purchase
Board approved
Your Indiana Landscape Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 804 IAC 1.1-2-7(d)–(k); IC 25-4-2-2. Fill in your details and download it in seconds.
Indiana splits the three professions across three boards, all administered by the Indiana Professional Licensing Agency: engineers under 864 IAC 1.1, architects and landscape architects under 804 IAC 1.1, and surveyors under 865 IAC 1. Each of the three seal rules prescribes its design by incorporating a picture rather than by listing words, so the wording has to be read off the figure: all three figures carry "REGISTERED", "No." above a rule line, "STATE OF" and "INDIANA" inside the inner circle in addition to the profession wording in the outer band. The legend recorded here for each profession is the profession wording its own source fixes — "professional engineer" by statute for engineers, "registered architect" by statute for architects, and "LAND SURVEYOR" from the figure for surveyors, whose statute prescribes no wording at all. Only the surveyor rule regulates electronic signatures in detail — 865 IAC 1-7-4(c) demands unique identification, verifiability, direct control and a retained permanent digital copy — while the engineer rule accepts an electronic signature with no such conditions and the architect rule still speaks of the person's "original signature" beside the seal. Because 864 IAC 1.1-7-2, 1.1-7-3 and 1.1-7-4 were renumbered by the Legislative Services Agency as 865 IAC 1-7-1, 1-7-2 and 1-7-3 when surveyors were separated from the engineers' title, older material citing "864 IAC 1.1-7" for a surveyor's seal now points at the engineer rule; the code's chapter heading at IC 25-21.5-2 likewise still reads "State Board of Registration for Land Surveyors" even though IC 25-21.5-2-1 establishes the state board of registration for professional surveyors. Rule text here was read in the 2026 Edition of the Indiana Administrative Code and in the 2026 Indiana Code. Architects and landscape architects share one seal rule: 804 IAC 1.1-2-7 is captioned "Architect's seal", and subsections (a)–(c) govern the architect's seal while (d)–(f) govern the landscape architect's; subsections (g)–(l) apply to both. The rule was read in the 2026 edition of the Indiana Administrative Code as published by the Indiana General Assembly at iar.iga.in.gov — the edition the board's own in.gov page links to — and the statute in the official Indiana Code 2026 chapter file for IC 25-4-2 at https://iga.in.gov/ic/2026/Title_25/Article_4/Chapter_2.pdf.
Full Indiana Landscape Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Indiana Landscape Architect stamp generator creates instant state-approved electronic landscape architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Indiana digital landscape architect stamps and seals.
Once you are licensed in Indiana, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 804 IAC 1.1-2-7(d)–(k); IC 25-4-2-2, which is the provision the Board of Registration for Architects and Landscape Architects will measure the seal against.
Indiana’s landscape architect seal rule is 804 IAC 1.1-2-7(d)–(k); IC 25-4-2-2, administered by the Board of Registration for Architects and Landscape Architects, a different body from the engineering board. The seal must carry “Registered Landscape Architect State of Indiana”, and "The landscape architect seal shall not be less than one and five-eighths (1 5/8) inches or more than one and seven-eighths (1 7/8) inches in outside diameter, using the following design:" — the rule then reproduces the design.
A further 14 requirements, each tied to the subsection that imposes it, are itemised in the Indiana requirements section on this page.
"The landscape architect seal shall not be less than one and five-eighths (1 5/8) inches or more than one and seven-eighths (1 7/8) inches in outside diameter, using the following design:" — the rule then reproduces the design. This is set by 804 IAC 1.1-2-7(d).
Can the signature run across an Indiana seal? No — 804 IAC 1.1-2-7(h) requires the original signature "directly adjacent thereto (not across the seal)", the opposite of the practice several neighbouring states allow. (804 IAC 1.1-2-7(h)) Does the "LA" prefix have to appear in the number on the seal? It may be excluded — the rule requires only that the name and registration number correspond to the name and certificate number on the certificate. (804 IAC 1.1-2-7(f)) Is one seal on the cover sheet enough? No — for work submitted for governmental review the seal and signature go on the title or cover page of the specifications and on each sheet of the drawings. (804 IAC 1.1-2-7(i))
Each state licenses landscape architects under its own board and its own seal design. Every state below has its own landscape architect stamp generator.
Compare every jurisdiction’s landscape architect seal rule side by side →
