Your board-compliant seal will be ready for download after purchase
Board approved
Your Delaware Geologist seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 24 Del. C. § 3619; 24 Del. Admin. Code 3600 § 3.0. Fill in your details and download it in seconds.
The 1½-to-1¾-inch range widely quoted for Delaware engineers appears in no Delaware authority — Chapter 28 states no dimension and the Council publishes no seal specification. The section often cited for the seal, § 2823, is "Grounds for discipline; appeals". Rule 3.1 sets a compliance deadline of September 30, 2018 for procuring a seal meeting these specifications, and prints a specimen seal that the licensee's seal must match in all respects. Section 3.0 was adopted at 19 DE Reg. 1104 (06/01/16) and carried forward in the Board's 2023 rule amendments (27 DE Reg. 260, 10/01/23).
Full Delaware Geologist seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Delaware Geologist stamp generator creates instant state-approved electronic geologist stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Delaware digital geologist stamps and seals.
Once you are licensed in Delaware, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 24 Del. C. § 3619; 24 Del. Admin. Code 3600 § 3.0, which is the provision the Delaware State Board of Geologists will measure the seal against.
Delaware’s geologist seal rule is 24 Del. C. § 3619; 24 Del. Admin. Code 3600 § 3.0, administered by the Delaware State Board of Geologists, a different body from the engineering board. The seal must carry “STATE OF DELAWARE - LICENSED PROFESSIONAL GEOLOGIST”, and not less than 1 1/2 inches in diameter; the rule sets a minimum only and requires the seal to comply in all respects with the specimen printed in the rule.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Delaware requirements section on this page.
Not less than 1 1/2 inches in diameter; the rule sets a minimum only and requires the seal to comply in all respects with the specimen printed in the rule. This is set by 24 Del. Admin. Code 3600 §§ 3.1, 3.2.
Rule 3.2 permits an electronic seal and signature in place of a stamped or embossed impression and original signature only for documents that are transmitted electronically, and requires the graphic image to look the same in all respects as the specimen in the rule. (24 Del. Admin. Code 3600 § 3.2)
Rule 3.6 requires computer files of reports, drawings or similar technical work that will become public record or be relied upon to include a statement naming the licensee, the DE license number and the date, in the exact form set out in the rule. (24 Del. Admin. Code 3600 § 3.6)
Each state licenses geologists under its own board and its own seal design. Every state below has its own geologist stamp generator.
Compare every jurisdiction’s geologist seal rule side by side →
