Your board-compliant seal will be ready for download after purchase
Board approved
Your Alabama Interior Designer seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in Ala. Code § 34-15C-8; Ala. Admin. Code r. 485-X-4-.01. Fill in your details and download it in seconds.
Chapter 330-X-11 is still published under the Board's former name, Alabama State Board of Registration for Professional Engineers and Land Surveyors. Seals obtained before the rule was adopted that conform to prior Board rules remain acceptable. The Alabama Administrative Code chapter is still captioned "Alabama State Board of Registration for Interior Design", while Ala. Code § 34-15C-4 and the agency's own site use "Alabama Board for Registered Interior Designers"; they are the same body. Rule 485-X-4-.01 was last amended effective December 24, 2018.
Full Alabama Interior Designer seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Alabama Interior Designer stamp generator creates instant state-approved electronic interior designer stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Alabama digital interior designer stamps and seals.
Once you are licensed in Alabama, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Ala. Code § 34-15C-8; Ala. Admin. Code r. 485-X-4-.01, which is the provision the Alabama Board for Registered Interior Designers will measure the seal against.
Alabama’s interior designer stamp rule is Ala. Code § 34-15C-8; Ala. Admin. Code r. 485-X-4-.01, administered by the Alabama Board for Registered Interior Designers, a different body from the engineering board. The seal must carry “Registered Interior Designer”, and two inches in diameter. Rule 485-X-4-.01(3) states the seal "shall be circular, two inches in diameter" — the only dimension in either the statute or the rule.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Alabama requirements section on this page.
Two inches in diameter. Rule 485-X-4-.01(3) states the seal "shall be circular, two inches in diameter" — the only dimension in either the statute or the rule. This is set by Ala. Admin. Code r. 485-X-4-.01(3).
No. Rule 485-X-4-.01(3) states seals are for individual use only and are not to utilize the name of the business entity — only the registrant's own name and registration number belong inside the inner circle. (Ala. Admin. Code r. 485-X-4-.01(3))
The rule does not say so. Rule 485-X-4-.01(2) lets the registrant create his or her own seal, including a computer-generated one; (5) says the Board "shall, with a fee, offer an electronic seal in AutoCAD format" — an offer the Board must make, not a purchase the registrant must make. (Ala. Admin. Code r. 485-X-4-.01(2), (5))
Each state licenses interior designers under its own board and its own seal design. Every state below has its own interior designer stamp generator.
Compare every jurisdiction’s interior designer seal rule side by side →
