PE Digital Stamps Logo

Generate digital Wyoming Engineer (PE) stamps instantly

  • STATE BOARD APPROVED
  • HIGH-QUALITY FILES IN VARIOUS FORMATS
  • INSTANT ACCESS
  • FREE-OF-CHARGE REVISIONS
Loading seal preview
Text Size
Text Size

Your board-compliant seal will be ready for download after purchase

Wyoming PE Stamp Requirements

Board approved

Your Wyoming Professional Engineer seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601. Fill in your details and download it in seconds.

The Wyoming rules in full, with citations

Chapter 5 of the engineering board's rules was last amended 3 September 2021, and its Section 2, headed "Sizes", governs sheet dimensions rather than seal diameter — the seal is dimensioned in Section 1(a). Every version of that chapter in force between 1 July 2013 and 24 March 2020 prescribed no dimensions at all; the 24 March 2020 amendment restored the 1¾-inch and 1¼-inch figures the rules had carried before the 2013 rewrite. Seals authorized before 1 July 2013 may still be used.

Professional Engineer seal

Board:
Wyoming Board of Professional Engineers and Professional Land Surveyors
Rule:
Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601
Diameter:
Two concentric circles, the outer circle 1¾ inches in diameter and the inner circle 1¼ inches.
Legend (any one of):
“Professional Engineer” · “Professional Engineer & Land Surveyor”
  • The upper portion of the annular space between the two circles bears "Professional Engineer", or "Professional Engineer & Land Surveyor" for a licensee who holds both licenses, and the bottom of that annular space bears the inscription "Wyoming". (Wyo. Code R. 037.0001.5 § 1(a))
  • The inner circle contains the licensee's name, the license number and the word "Date", and the design illustrated in the rule places the Wyoming bucking horse and rider inside it. The license number is centered where the illustration prints "NUMBER", and the digits should be no larger than the word "NAME". (Wyo. Code R. 037.0001.5 § 1(a))
  • To be valid, any seal must be legible in its entirety, and the signature of the licensee and the date of signing must be superimposed over the seal. (Wyo. Code R. 037.0001.5 § 1(c))
  • When a document runs to more than one sheet, the title page or the first page is sealed, signed and dated by the licensee who supervised the work and is responsible for it. (Wyo. Code R. 037.0001.5 § 1(c))
  • The professional seal, the signature and the date shall be placed on all final designs, specifications, maps, land surveys, reports, plats, drawings and plans filed or recorded under W.S. 33-29-801. (Wyo. Stat. § 33-29-601(c))
  • Electronically generated seals are acceptable if they comply with the design in subsection (a) and are accompanied by the licensee's signature and date, and under the Uniform Electronic Transactions Act an electronic image of the seal, signature and date may be used in place of originals on electronic submittals to government agencies or between private entities. (Wyo. Code R. 037.0001.5 § 1(c), (d))
  • A digital signature must be unique to the licensee using it, capable of verification, under the sole responsibility and control of the licensee affixing it, and linked to the document so that it is invalidated if any data in the document is changed. (Wyo. Code R. 037.0001.5 § 1(e))
  • A newly licensed applicant must purchase a seal and file with the Board, on the Board's form, an impression or stamp of it with an original signature superimposed over it. (Wyo. Code R. 037.0001.5 § 1(h))

Full Wyoming PE seal requirements, with every citation →

File formats

All formats included

format preview

HIGH-QUALITY RASTER FORMAT

format preview

VECTOR FORMAT, INFINITELY SCALABLE

format preview

UNIVERSAL DOCUMENT FORMAT

format preview

AUTOCAD COMPATIBLE FORMAT

format preview

PROFESSIONAL PRINT FORMAT

How it works

Create your Wyoming digital PE stamp

1

Select your state & profession

2

Add your name & license number

3

Adjust the text size using the controls

4

Select your discipline

5

Add your signature & customize (optional)

6

Download instantly to your computer

Digital PE stamp with callouts showing where the name, license number and other details go

Software compatibility

Compatible with PDF and CAD software

Bluebeam
Adobe Acrobat
Wyoming PE stamp applied to a PDF drawing in Bluebeam Revu
AutoCAD
Autodesk Revit
Wyoming PE stamp DXF opened in AutoCAD

Who we are

About

Our digital Wyoming PE stamp generator creates instant state-approved electronic pe stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.

State boards

State board-approved, including

  • California Board for Professional Engineers, Land Surveyors, and Geologists logo
  • Texas Board of Professional Engineers and Land Surveyors logo
  • Florida Board of Professional Engineers logo
  • New York State Education Department, Office of the Professions logo
  • Pennsylvania State Registration Board for Professional Engineers, Land Surveyors and Geologists logo
  • Ohio Board of Registration for Professional Engineers and Surveyors logo
  • Georgia State Board of Registration for Professional Engineers and Land Surveyors logo
  • North Carolina Board of Examiners for Engineers and Surveyors logo
  • Washington State Board of Registration for Professional Engineers and Land Surveyors logo
  • Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design logo
  • Louisiana Professional Engineering and Land Surveying Board logo
  • Oklahoma State Board of Licensure for Professional Engineers and Land Surveyors logo

FAQ

Wyoming Engineer Seal FAQs

Frequently asked questions about Wyoming digital engineer stamps and seals.

How do I obtain a digital Wyoming professional engineer (PE) seal or stamp?

Once you are licensed in Wyoming, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601, which is the provision the Wyoming Board of Professional Engineers and Professional Land Surveyors will measure the seal against.

What are the requirements for the Wyoming PE stamp or seal?

Wyoming’s PE seal rule is Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601, administered by the Wyoming Board of Professional Engineers and Professional Land Surveyors. The seal must carry any one of “Professional Engineer”, “Professional Engineer & Land Surveyor”, and two concentric circles, the outer circle 1¾ inches in diameter and the inner circle 1¼ inches.

A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Wyoming requirements section on this page.

What size does a Wyoming PE seal have to be?

Two concentric circles, the outer circle 1¾ inches in diameter and the inner circle 1¼ inches. This is set by Wyo. Code R. 037.0001.5 § 1(a).

Does a Wyoming PE seal read "Wyoming" or "State of Wyoming"?

The engineer's and the surveyor's seal carries the single word "Wyoming" at the bottom of the annular space, not "State of Wyoming". "STATE OF WYOMING" belongs to the architect's seal, which is set by a different board under a different rule. (Wyo. Code R. 037.0001.5 § 1(a); Wyo. Code R. 012.0001.9 § 2(a))

Does the inner circle of a Wyoming PE seal have a required size?

The inner circle of the engineering seal is dimensioned, not decorative: a 1¾-inch outer circle takes a 1¼-inch inner circle. The Board reviews the impression every new licensee files and may disapprove a seal that does not meet the exact specifications, requiring a corrected one before any work is sealed. (Wyo. Code R. 037.0001.5 § 1(a), (h))

Can a Wyoming PE seal say "P.E."?

"P.E." is not a Wyoming legend. Section 1(a) allows exactly three phrases — "Professional Engineer", "Professional Land Surveyor" and "Professional Engineer & Land Surveyor" — and the placeholders in the rule's illustration are not part of the seal: the words and parentheses "(NUMBER)" and "(NAME)" should not appear on it. (Wyo. Code R. 037.0001.5 § 1(a))

Does every sheet of a Wyoming PE drawing set need a seal?

An engineer or land surveyor seals the title page or the first page of a multi-sheet document, not every sheet. It is Wyoming's architects board that asks for the seal on each sheet of the original drawings. (Wyo. Code R. 037.0001.5 § 1(c); Wyo. Code R. 012.0001.9 § 3(b))

What date goes in the "Date" field on a Wyoming seal?

Nothing on a Wyoming seal is a license expiration date. The word "Date" inside the inner circle is where the date of signing goes, and both the signature and that date have to be superimposed over the seal rather than placed beside it. (Wyo. Code R. 037.0001.5 § 1(a), (c))

I am also a registered land surveyor — is there a combined stamp?
Yes. The Wyoming Engineer and Land Surveyor stamp carries both credentials on one seal, so a licensee who is also a registered land surveyor does not need two separate stamps.