PE Digital Stamps Logo

Generate digital Utah Engineer (PE) stamps instantly

  • STATE BOARD APPROVED
  • HIGH-QUALITY FILES IN VARIOUS FORMATS
  • INSTANT ACCESS
  • FREE-OF-CHARGE REVISIONS
Loading seal preview
Text Size
Text Size
Text Size

Your board-compliant seal will be ready for download after purchase

Utah PE Stamp Requirements

Board approved

Your Utah Professional Engineer seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in Utah Admin. Code R156-22-601 (Seal Requirements). Fill in your details and download it in seconds.

The Utah rules in full, with citations

R156-22-601 states a minimum diameter and nothing else; the "maximum 2 inches" figure circulated for Utah is in no part of the rule. The agency is now the Division of Professional Licensing (DOPL); the older name Division of Occupational and Professional Licensing survives only in the legacy heading of the R156 code title.

Professional Engineer seal

Board:
Professional Engineers and Professional Land Surveyors Licensing Board
Rule:
Utah Admin. Code R156-22-601 (Seal Requirements)
Diameter:
Circular, 1-1/2 inches minimum diameter. The rule states no maximum.
Legend (any one of):
“Professional Engineer” · “Professional Structural Engineer”
  • Each seal includes the licensee's name, license number, "State of Utah", and, as appropriate, "Professional Engineer", "Professional Structural Engineer", or "Professional Land Surveyor". (R156-22-601(1)(b))
  • Each seal is signed and dated with the signature and date appearing across the face of each seal imprint. (R156-22-601(1)(c))
  • Each original set of final plans, specifications, reports, maps, sketches, surveys, drawings, documents and plats has, at a minimum, the original seal imprint, original signature and date on the cover or title sheet. (R156-22-601(1)(d))
  • A seal may be a wet stamp, embossed, or electronically produced, and electronically generated signatures are acceptable. (R156-22-601(1)(e)-(f))
  • It is the responsibility of the licensee to provide adequate security when documents with electronic seals and electronic signatures are submitted. The rule prescribes no certificate technology and names no signature statute. (R156-22-601(1)(g))
  • Sheets subsequent to the cover of specifications are not required to be sealed, signed and dated. (R156-22-601(1)(g))
  • Copies of the original set are permitted if the seal, signature and date are clearly recognizable. (R156-22-601(1)(h))
  • A person who qualifies for and uses the title of professional engineer intern is not permitted to use a seal. (R156-22-601(2))
  • Utah Code § 58-22-601 requires the seal but delegates its design and implementation entirely to the division by rule, so R156-22-601 is the whole of the specification and no artwork is prescribed. (Utah Code § 58-22-601)

Full Utah PE seal requirements, with every citation →

File formats

All formats included

format preview

HIGH-QUALITY RASTER FORMAT

format preview

VECTOR FORMAT, INFINITELY SCALABLE

format preview

UNIVERSAL DOCUMENT FORMAT

format preview

AUTOCAD COMPATIBLE FORMAT

format preview

PROFESSIONAL PRINT FORMAT

How it works

Create your Utah digital PE stamp

1

Select your state & profession

2

Add your name & license number

3

Adjust the text size using the controls

4

Select your discipline

5

Add your signature & customize (optional)

6

Download instantly to your computer

Digital PE stamp with callouts showing where the name, license number and other details go

Software compatibility

Compatible with PDF and CAD software

Bluebeam
Adobe Acrobat
Utah PE stamp applied to a PDF drawing in Bluebeam Revu
AutoCAD
Autodesk Revit
Utah PE stamp DXF opened in AutoCAD

Who we are

About

Our digital Utah PE stamp generator creates instant state-approved electronic pe stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.

State boards

State board-approved, including

  • California Board for Professional Engineers, Land Surveyors, and Geologists logo
  • Texas Board of Professional Engineers and Land Surveyors logo
  • Florida Board of Professional Engineers logo
  • New York State Education Department, Office of the Professions logo
  • Pennsylvania State Registration Board for Professional Engineers, Land Surveyors and Geologists logo
  • Ohio Board of Registration for Professional Engineers and Surveyors logo
  • Georgia State Board of Registration for Professional Engineers and Land Surveyors logo
  • North Carolina Board of Examiners for Engineers and Surveyors logo
  • Washington State Board of Registration for Professional Engineers and Land Surveyors logo
  • Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design logo
  • Louisiana Professional Engineering and Land Surveying Board logo
  • Oklahoma State Board of Licensure for Professional Engineers and Land Surveyors logo

FAQ

Utah Engineer Seal FAQs

Frequently asked questions about Utah digital engineer stamps and seals.

How do I obtain a digital Utah professional engineer (PE) seal or stamp?

Once you are licensed in Utah, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Utah Admin. Code R156-22-601 (Seal Requirements), which is the provision the Professional Engineers and Professional Land Surveyors Licensing Board will measure the seal against.

What are the requirements for the Utah PE stamp or seal?

Utah’s PE seal rule is Utah Admin. Code R156-22-601 (Seal Requirements), administered by the Professional Engineers and Professional Land Surveyors Licensing Board. The seal must carry any one of “Professional Engineer”, “Professional Structural Engineer”, and circular, 1-1/2 inches minimum diameter. The rule states no maximum.

A further 9 requirements, each tied to the subsection that imposes it, are itemised in the Utah requirements section on this page.

What size does an Utah PE seal have to be?

Circular, 1-1/2 inches minimum diameter. The rule states no maximum. This is set by R156-22-601(1)(a).

Is there a maximum diameter for a Utah PE seal?

1-1/2 inches is a floor, not a range. The rule states a minimum diameter and no maximum, so the "minimum 1½ inches, maximum 2 inches" pairing quoted for Utah has no source in R156-22-601. (R156-22-601(1)(a))

Can the signature and date sit next to a Utah PE seal instead of across it?

The signature and date go across the face of the seal imprint. Placing them next to the seal, or putting the date in the title block, does not meet the rule. (R156-22-601(1)(c))

Can a Utah PE use the "Professional Structural Engineer" seal legend?

"Professional Structural Engineer" is a separate Utah legend for a separate license. A licensee holding only the professional engineer license uses "Professional Engineer" even on structural work. (R156-22-601(1)(b))

Can a professional engineer intern in Utah use a seal?

A professional engineer intern may not use a seal at all. (R156-22-601(2))