Your board-compliant seal will be ready for download after purchase
Board approved
Your Oregon Professional Engineer seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in OAR 820-025-0005 (Official Seal); OAR 820-025-0010 (digital seal and signature). Fill in your details and download it in seconds.
OAR 820-025-0005 was renumbered from OAR 820-010-0620 by BEELS 7-2015; the old number is still widely cited and no longer exists. The "at least 2 inches from point to point" wording came in with BEELS 3-2024, effective September 11, 2024, and replaced an older sentence that allowed a 1/4" tolerance against Exhibit 1. The board's Exhibit 1 handout on its website is dated April 26, 2017 and still reprints that superseded tolerance language.
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Oregon PE stamp generator creates instant state-approved electronic pe stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Oregon digital engineer stamps and seals.
Once you are licensed in Oregon, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows OAR 820-025-0005 (Official Seal); OAR 820-025-0010 (digital seal and signature), which is the provision the Oregon State Board of Examiners for Engineering and Land Surveying will measure the seal against.
Oregon’s PE seal rule is OAR 820-025-0005 (Official Seal); OAR 820-025-0010 (digital seal and signature), administered by the Oregon State Board of Examiners for Engineering and Land Surveying. The seal must carry “REGISTERED PROFESSIONAL ENGINEER”, and at least 2 inches from point to point. The seal is not circular and the rule prescribes no diameter. Reduced or enlarged seals are not permitted on final documents.
A further 10 requirements, each tied to the subsection that imposes it, are itemised in the Oregon requirements section on this page.
At least 2 inches from point to point. The seal is not circular and the rule prescribes no diameter. Reduced or enlarged seals are not permitted on final documents. This is set by OAR 820-025-0005(2).
The 1⅝-inch minimum and the 1⅝-to-1⅞-inch range quoted for Oregon are in no version of the rule, and both are under the legal minimum. The rule requires at least 2 inches from point to point, and the seal has no diameter because it is not round. (OAR 820-025-0005(2))
The date of registration is one of the four contents the rule requires on the seal. It is easy to leave out because almost no other jurisdiction asks for it. (OAR 820-025-0005(1))
The registrant signs through the middle of the seal, or in the place on the seal indicated for signature, in handwriting and in permanent ink. A digital signature replaces it only if it bears the phrase "digitally signed" and is independently verifiable by a Certificate Authority. (OAR 820-025-0005(4)-(5))
The word on the seal is "OREGON". "STATE OF OREGON" appears only on the certified water right examiner's seal in Exhibit 1-e. (OAR 820-025-0005(2), Exhibit 1)
