Your board-compliant seal will be ready for download after purchase
Board approved
Your Oklahoma Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording and the layout set out in OAC 55:10-11-8 (Licensee's seal). Fill in your details and download it in seconds.
The board writes its own name as the Oklahoma State Board of Licensure for Professional Engineers and Surveyors; OAC Title 245 and 59 O.S. § 475.3 still read "Professional Engineers and Land Surveyors". A Professional Structural Engineer may hold an additional seal reading "Professional Structural Engineer" for structural projects, and uses the ordinary "Licensed Professional Engineer" seal for other engineering work.
Full Oklahoma Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Oklahoma Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Oklahoma digital architect stamps and seals.
Once you are licensed in Oklahoma, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows OAC 55:10-11-8 (Licensee's seal), which is the provision the Oklahoma Board of Licensed Architects, Landscape Architects and Licensed Interior Designers will measure the seal against.
Oklahoma’s architect stamp rule is OAC 55:10-11-8 (Licensee's seal), administered by the Oklahoma Board of Licensed Architects, Landscape Architects and Licensed Interior Designers, a different body from the engineering board. The seal must carry “Licensed Architect, State of Oklahoma”, and the rule does not prescribe a diameter.
A further 4 requirements, each tied to the subsection that imposes it, are itemised in the Oklahoma requirements section on this page.
OAC 55:10-11-8 (Licensee's seal) governs the Oklahoma architect’s seal but does not prescribe a diameter. Sizes quoted for Oklahoma elsewhere generally come from stamp suppliers’ catalogues rather than from the rule. What the rule does require is that your name and license number stay clearly legible.
No. Both the statute and the rule prescribe the same words — "Licensed Architect, State of Oklahoma" — alongside the architect's name and Oklahoma license number. Note what that does to the state name: the architect's seal must say "State of Oklahoma" in full, while the engineer's and land surveyor's seal, written by a different board, inscribes "Oklahoma" alone. The two professions are opposites here, and copying either one across is a non-compliant seal. A landscape architect uses "Licensed Landscape Architect, State of Oklahoma" instead. (59 O.S. § 46.25; OAC 55:10-11-8(c))
There is none. OAC 55:10-11-8 prescribes the words and nothing dimensional — no diameter, no inner circle, no minimum and no maximum. The two commercially designated sizes quoted for Oklahoma, the 1-7/8" seal and the 1-5/8" seal with their prescribed inner and outer circles, come from the engineers' and surveyors' rule at OAC 245:15-17-1(c), a different title of the Administrative Code administered by a different agency. Architects are licensed by the Oklahoma Board of Licensed Architects, Landscape Architects and Licensed Interior Designers, not by the engineering and surveying board. (OAC 55:10-11-8; cf. OAC 245:15-17-1(c))
The rule settles the wording but not the arrangement — it says only that the seal shall contain the architect's name, Oklahoma license number and the words "Licensed Architect, State of Oklahoma". The board's own published example resolves the layout: "STATE OF OKLAHOMA" arcs across the top, "LICENSED ARCHITECT" arcs along the bottom, and the registrant's name sits above the license number in the center. That is the reverse of the engineer's seal, where the professional title reads clockwise at the top and the state name counter-clockwise at the bottom. (OAC 55:10-11-8(c); Board, Seal Requirements — All Professions (2024))
Yes, but you will not find it in the seal rule. OAC 55:10-11-8 covers only the requirement to procure a seal, the acceptable types and the design; the dating obligation sits in the statute, which requires all technical submissions prepared by the architect or under the architect's responsible control to be sealed, signed and dated. An architect who works from the Administrative Code alone will seal and sign and never see the third word. (59 O.S. § 46.25; OAC 55:10-11-8)
In two defined cases, yes. The statute's baseline is that no architect may sign or seal technical submissions unless they were prepared by or under the architect's responsible control, but it then permits sealing portions prepared by or under the responsible control of another person licensed under the State Architectural and Licensed Interior Designers Act, provided the architect has reviewed and adapted them in whole or in part and has either coordinated their preparation or integrated them into the work; and portions not required to be prepared under an architect's responsible control, provided the architect has reviewed, adapted and integrated them. Review alone is not enough — the coordination or integration step is part of the test. (59 O.S. § 46.25)
