Your board-compliant seal will be ready for download after purchase
Board approved
Your New Hampshire Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in N.H. Code Admin. R. Arch 306.02 (Licensed Architect Seal/Stamp); RSA 310-A:44. Fill in your details and download it in seconds.
The Joint Board of Licensure and Certification no longer exists. RSA 310-A:1, the section that created it, was repealed by 2023, 235:27, effective July 15, 2023, and separate boards for professional engineers, architects, land surveyors, natural scientists and foresters now sit under the Office of Professional Licensure and Certification. Eng 308.02 was last amended June 25, 2024.
Full New Hampshire Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital New Hampshire Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about New Hampshire digital architect stamps and seals.
Once you are licensed in New Hampshire, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows N.H. Code Admin. R. Arch 306.02 (Licensed Architect Seal/Stamp); RSA 310-A:44, which is the provision the New Hampshire Board of Architects will measure the seal against.
New Hampshire’s architect stamp rule is N.H. Code Admin. R. Arch 306.02 (Licensed Architect Seal/Stamp); RSA 310-A:44, administered by the New Hampshire Board of Architects, a different body from the engineering board. The seal must carry “Licensed Architect”, and two concentric circles: the outer circle 1-9/16 inches in diameter, the inner circle 15/16 of an inch.
A further 3 requirements, each tied to the subsection that imposes it, are itemised in the New Hampshire requirements section on this page.
Two concentric circles: the outer circle 1-9/16 inches in diameter, the inner circle 15/16 of an inch. This is set by Arch 306.02.
It says "The State of New Hampshire," with the definite article, and it goes at the bottom. Arch 306.02(b) puts "Licensed Architect" at the top of the space between the two circles and "The State of New Hampshire" at the bottom. That is the reverse of the engineer's layout in the same rule series, where "State of New Hampshire" is on top and "Professional Engineer" below, and the architect's version carries a word the engineer's does not. (N.H. Code Admin. R. Arch 306.02(b); cf. N.H. Code Admin. R. Eng 308.02(b))
The full name of the licensee and the license number, written horizontally, and nothing else. The engineer's seal additionally carries the word "Licensed" at the bottom of its inner circle, because Eng 308.02(b) splits the statutory legend "Licensed Professional Engineer" across the two rings. The architect's legend is complete in the outer ring, so "Licensed" is not repeated inside, and Arch 306.02(b) admits no date, no state and no expiration there. (N.H. Code Admin. R. Arch 306.02(b); RSA 310-A:44; cf. N.H. Code Admin. R. Eng 308.02(b))
There is no range. Arch 306.02(b) states no minimum and no maximum and instead fixes both circles as exact figures: the outer circle 1-9/16 inches in diameter and the inner circle 15/16 of an inch. Because the rule prescribes two dimensions rather than one, a stamp ordered to an overall diameter alone satisfies only half of the specification. (N.H. Code Admin. R. Arch 306.02(b))
Electronic and digital seals are not addressed for architects. Arch 306.02(a) requires the licensee to acquire an impression type seal or rubber stamp of the design specified by the section, and no provision of the Arch rules or of RSA 310-A mentions an electronic, digital, scanned or computer-generated architect seal or signature. Confirm with the Board before submitting one. (N.H. Code Admin. R. Arch 306.02(a); RSA 310-A:44)
Arch 306.02 — and the number is recent. The rule's own source note records that it was substituted by document #14553 effective June 2, 2026 and that it was "formerly Arch 306.03," so the seal section carried a different number until then and older citations point at the previous numbering. The administering body has moved too: RSA 310-A:1, which created the Joint Board of Licensure and Certification, was repealed by 2023, 235:27, effective July 15, 2023, and a separate Board of Architects now sits under the Office of Professional Licensure and Certification. (N.H. Code Admin. R. Arch 306.02 (source note, ss by #14553, eff. 6-2-26, formerly Arch 306.03); RSA 310-A:1 (repealed by 2023, 235:27, eff. July 15, 2023))
