Your board-compliant seal will be ready for download after purchase
Board approved
Your Missouri Professional Engineer seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 20 CSR 2030-3.060 (Licensee's Seal). Fill in your details and download it in seconds.
Chapter 3 also contains 20 CSR 2030-3.010, which sets the official seal of the Board itself at two and one-quarter inches. That is the Board's own seal, imprinted on documents the Board issues, not the licensee's seal, and the two are easily conflated because they sit in the same chapter.
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Missouri PE stamp generator creates instant state-approved electronic pe stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Missouri digital engineer stamps and seals.
Once you are licensed in Missouri, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 20 CSR 2030-3.060 (Licensee's Seal), which is the provision the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Professional Landscape Architects will measure the seal against.
Missouri’s PE seal rule is 20 CSR 2030-3.060 (Licensee's Seal), administered by the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Professional Landscape Architects. The seal must carry “Professional Engineer”, and exactly one and three-quarters inches (1 3/4 inches) in diameter. The rule prescribes a single diameter, not a range.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Missouri requirements section on this page.
Exactly one and three-quarters inches (1 3/4 inches) in diameter. The rule prescribes a single diameter, not a range. This is set by 20 CSR 2030-3.060(1).
"P.E." is not an authorized legend. PE appears in the rule only as the roman capital prefix immediately before the license number, never as the title on the seal. (20 CSR 2030-3.060(1))
A professional engineer licensed prior to January 1, 2002 may display "Registered Professional Engineer" on the lower part, and that seal takes the prefix E rather than PE. (20 CSR 2030-3.060(1)(B))
The rule prescribes a closed design. Nothing in it authorizes a branch or discipline of engineering anywhere on the seal. (20 CSR 2030-3.060(1))
The date is the date the document was originally sealed, and it belongs with the signature on the outside of each sheet of the set, not in the title block alone. (20 CSR 2030-3.060(3))
