Your board-compliant seal will be ready for download after purchase
Board approved
Your Missouri Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 20 CSR 2030-3.060 (Licensee's Seal). Fill in your details and download it in seconds.
Chapter 3 also contains 20 CSR 2030-3.010, which sets the official seal of the Board itself at two and one-quarter inches. That is the Board's own seal, imprinted on documents the Board issues, not the licensee's seal, and the two are easily conflated because they sit in the same chapter.
Full Missouri Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Missouri Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Missouri digital architect stamps and seals.
Once you are licensed in Missouri, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 20 CSR 2030-3.060 (Licensee's Seal), which is the provision the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Professional Landscape Architects will measure the seal against.
Missouri’s architect stamp rule is 20 CSR 2030-3.060 (Licensee's Seal), administered by the Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Professional Landscape Architects. The seal must carry “Architect”, and exactly one and three-quarters inches (1 3/4 inches) in diameter. The rule prescribes a single diameter, not a range.
A further 3 requirements, each tied to the subsection that imposes it, are itemised in the Missouri requirements section on this page.
Exactly one and three-quarters inches (1 3/4 inches) in diameter. The rule prescribes a single diameter, not a range. This is set by 20 CSR 2030-3.060(1).
Only an architect licensed before January 1, 2002 may display it, and for architects alone the license number keeps the same prefix either way — the roman capital letter A. That is the architect's peculiarity in this rule: an engineer or a land surveyor who uses the pre-2002 legend must also change the prefix, from PE to E and from PLS to LS respectively. Everyone licensed since then takes the bare word "Architect" on the lower part of the seal, and "Licensed Architect" appears nowhere in the rule at all. (20 CSR 2030-3.060(1), (1)(A), (1)(B), (1)(C))
No — that is the Board's own official seal, one rule earlier in the same chapter. 20 CSR 2030-3.010 describes it as the Great Seal of the State of Missouri with the Board's name substituted for the words "The Great Seal of the State of Missouri", surrounded by a cord-like circle within a fringed circle, of the dimensions of two and one-quarter inches in diameter. An architect's personal seal is one and three-quarters inches — a single fixed diameter, not a minimum and not one end of a range. (20 CSR 2030-3.010(1); 20 CSR 2030-3.060(1))
No. The rule allows an embossing seal, a rubber stamp or a computer-generated image, but requires that image to be identical in size, design and content with the design section (1) prescribes. Size is one of the three things that must be identical, so a computer-generated seal scaled down to sit in a title block is no longer the seal the rule authorizes — the 1 3/4 inch figure binds the electronic seal exactly as it binds the embosser. (20 CSR 2030-3.060(2) and (1))
Because two separate provisions are at work. Section 327.411.2, RSMo makes the personal seal the legal equivalent of the licensee's signature whenever and wherever it is used, which is what fixes responsibility for the contents of everything sealed on the seal's owner. It does not displace 20 CSR 2030-3.060(3), which separately requires the licensee to affix a signature and place the date when the document was originally sealed — the date of sealing, not today's date — at the minimum to the original of each sheet in a set of all final technical submissions. (§ 327.411.2, RSMo; 20 CSR 2030-3.060(3))
