Your board-compliant seal will be ready for download after purchase
Board approved
Your Kansas Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in K.A.R. 66-6-1 (Seals and signatures); K.S.A. 74-7023(d). Fill in your details and download it in seconds.
One board licenses all five of the Kansas technical professions — architecture, landscape architecture, professional engineering, professional geology and professional surveying (K.S.A. 74-7003(w)) — so there is no separate architects' board or surveyors' board to consult. Landscape architects and geologists use the same two-circle seal with "LANDSCAPE ARCHITECT" or "PROFESSIONAL GEOLOGIST" in the outer band. Note where the wording comes from: K.A.R. 66-6-1(a) fixes the geometry and the inner-circle wording itself, but describes the outer band only as "the licensee's profession"; the profession words are supplied by the Board's own published guidance rather than by the regulation. K.A.R. 66-6-1 was last amended December 4, 2020, and on August 10, 2026 the Board's proposed-rules page read "There are no currently proposed amended regulations." One presentational discrepancy is worth knowing: the regulation as filed with the Secretary of State prints "LICENSED" and "KANSAS" in capitals, and the Board's PDF handouts print the profession names in capitals too, while the HTML copy of the same material on the Board's seal page renders all of those words in title case. The regulation prescribes the words, not their capitalization.
Full Kansas Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Kansas Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Kansas digital land surveyor stamps and seals.
Once you are licensed in Kansas, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows K.A.R. 66-6-1 (Seals and signatures); K.S.A. 74-7023(d), which is the provision the Kansas State Board of Technical Professions will measure the seal against.
Kansas’ land surveyor seal rule is K.A.R. 66-6-1 (Seals and signatures); K.S.A. 74-7023(d), administered by the Kansas State Board of Technical Professions. The seal must carry “PROFESSIONAL SURVEYOR”, and two concentric circles: the outer circle shall be 1⅝ inches in diameter and the inner circle 1 1/16 inches in diameter.
A further 6 requirements, each tied to the subsection that imposes it, are itemised in the Kansas requirements section on this page.
Two concentric circles: the outer circle shall be 1⅝ inches in diameter and the inner circle 1 1/16 inches in diameter. This is set by K.A.R. 66-6-1(a).
No. Kansas licenses "professional surveyors" under K.S.A. 74-7003(s), and the wording the Board publishes for the bottom of the outer band is "PROFESSIONAL SURVEYOR" — no "Land", and no "P.S." or "R.L.S." abbreviation anywhere. The regulation itself says only that the band carries "the licensee's profession"; the words come from the Board's "Examples of Seals by Profession" and its Seals and Signature FAQ, not from Agency 66. (K.S.A. 74-7003(s); K.A.R. 66-6-1(a); KSBTP, Examples of Seals by Profession)
Yes. K.A.R. 66-6-1(d)(1)(D) has an original land description prepared for the purpose of conveying an interest in real property sealed, signed and dated on its first or last page — a written description with no drawing attached still takes the seal, and it takes it in a prescribed place. (d)(1)(C) does the same for each survey plat, and under (b)(1) the signature and date go across the seal rather than beside it. (K.A.R. 66-6-1(d)(1)(C), (D); K.A.R. 66-6-1(b)(1))
The Kansas State Board of Technical Professions, which is also the engineers', architects', landscape architects' and geologists' board. K.S.A. 74-7003(w) lists professional surveying among the five technical professions and under K.S.A. 74-7004 the governor appoints one board for all of them, so K.A.R. 66-6-1 is the only seal regulation there is — there is no separate surveyors' board and no surveyor-specific seal provision, only the profession word that changes in the outer band. (K.S.A. 74-7003(w); K.S.A. 74-7004; K.A.R. 66-6-1(a))
