Your board-compliant seal will be ready for download after purchase
Board approved
Your Kansas Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in K.A.R. 66-6-1 (Seals and signatures); K.S.A. 74-7023(d). Fill in your details and download it in seconds.
One board licenses all five of the Kansas technical professions — architecture, landscape architecture, professional engineering, professional geology and professional surveying (K.S.A. 74-7003(w)) — so there is no separate architects' board or surveyors' board to consult. Landscape architects and geologists use the same two-circle seal with "LANDSCAPE ARCHITECT" or "PROFESSIONAL GEOLOGIST" in the outer band. Note where the wording comes from: K.A.R. 66-6-1(a) fixes the geometry and the inner-circle wording itself, but describes the outer band only as "the licensee's profession"; the profession words are supplied by the Board's own published guidance rather than by the regulation. K.A.R. 66-6-1 was last amended December 4, 2020, and on August 10, 2026 the Board's proposed-rules page read "There are no currently proposed amended regulations." One presentational discrepancy is worth knowing: the regulation as filed with the Secretary of State prints "LICENSED" and "KANSAS" in capitals, and the Board's PDF handouts print the profession names in capitals too, while the HTML copy of the same material on the Board's seal page renders all of those words in title case. The regulation prescribes the words, not their capitalization.
Full Kansas Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Kansas Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Kansas digital architect stamps and seals.
Once you are licensed in Kansas, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows K.A.R. 66-6-1 (Seals and signatures); K.S.A. 74-7023(d), which is the provision the Kansas State Board of Technical Professions will measure the seal against.
Kansas’ architect stamp rule is K.A.R. 66-6-1 (Seals and signatures); K.S.A. 74-7023(d), administered by the Kansas State Board of Technical Professions. The seal must carry “ARCHITECT”, and two concentric circles: the outer circle shall be 1⅝ inches in diameter and the inner circle 1 1/16 inches in diameter.
A further 6 requirements, each tied to the subsection that imposes it, are itemised in the Kansas requirements section on this page.
Two concentric circles: the outer circle shall be 1⅝ inches in diameter and the inner circle 1 1/16 inches in diameter. This is set by K.A.R. 66-6-1(a).
Not as a phrase — the two words live in different rings. K.A.R. 66-6-1(a) puts "the licensee's profession" at the bottom of the band between the two circles, and puts the words "LICENSED" at the top of the inner circle and "KANSAS" at the bottom of it, so the band reads "ARCHITECT" on its own. Note where that word comes from: the regulation never names a profession, and "ARCHITECT" is supplied by the Board's own published documents. "Registered Architect" appears in neither the regulation nor the Board's examples. (K.A.R. 66-6-1(a); KSBTP, Examples of Seals by Profession; KSBTP, FAQs for Seals and Signature Requirements)
The same board that licenses engineers. K.S.A. 74-7003(w) makes architecture one of five "technical professions" — with landscape architecture, professional engineering, professional geology and professional surveying — and under K.S.A. 74-7004 the governor appoints one state board of technical professions, of thirteen members, for all of them. K.A.R. 66-6-1 is the one seal regulation for all five, so there is no separate Kansas architects' board and no architect-specific seal rule to look for; a landscape architect's seal is the same design with "LANDSCAPE ARCHITECT" in the band. (K.S.A. 74-7003(w); K.S.A. 74-7004; K.A.R. 66-6-1(a); KSBTP, Examples of Seals by Profession)
Once, on the front. K.A.R. 66-6-1(d)(1)(B) has project-specific technical specifications sealed, signed and dated on the cover sheet or index page, while (d)(1)(A) has a set of drawings sealed on each drawing sheet unless a digital signature process links every sheet to the licensee's area of responsibility or a certification block designates the sheets each licensee is responsible for. Wherever the seal lands, the handwritten or authenticated digital signature and the date go across it, not beside it. (K.A.R. 66-6-1(d)(1)(A), (B); K.A.R. 66-6-1(b)(1))
