Your board-compliant seal will be ready for download after purchase
Board approved
Your Idaho Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording and the layout set out in Idaho Code § 54-304 (Architect's seal). Fill in your details and download it in seconds.
Idaho publishes no seal artwork for any of the three professions. Idaho Code § 54-1215(3)(e) hands the engineer and surveyor design to the board, and the board's only published statement about the wording is a June 2008 news bulletin announcing that the specification would move from "Registered" to "Licensed" on July 1, 2008; asked about the seal, the board's FAQ points licensees back to the letter the board sent when their license was issued. The 7-1-25 recodification of IDAPA 24.32.01 moved the seal rule from Section 012 to Section 200.01 and dropped the subsection headed "Standard Seals for Engineers and Land Surveyors" — and the board's FAQ still cites IDAPA 24.32.01.101.03, "Use of Seal on Documents," which the recodified chapter no longer contains. The contact block on the cover of that chapter prints the board's website as https://dopl.idaho.gov/pht/, which is the Physical Therapy Board; the working address is https://dopl.idaho.gov/ipels/, and the older ipels.idaho.gov host no longer resolves at all. Two articles in the board's own Ethics and Professional Practice Guidance Document, both carrying the same 07/10/2025 revision date, disagree about facsimile signatures: "Digital Signatures" lists "a facsimile image of the licensee's signature adjacent to or over an electronically generated stamp" as an allowable form since Senate Bill 1235, while "Stamping Practices" still says "you cannot use computer generated signatures and dates" and requires the licensee to personally sign and date each original. The statute itself no longer defines "signature" at all. For architects, Idaho Code § 54-304(2) provides that the design and use of the seal "shall be as required by board rule," but IDAPA 24.01.01 contains no seal rule, and the rulemaking pending before that board in 2026 adds one for certified interior designers only.
Full Idaho Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Idaho Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Idaho digital architect stamps and seals.
Once you are licensed in Idaho, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Idaho Code § 54-304 (Architect's seal), which is the provision the Board of Architects and Landscape Architects will measure the seal against.
Idaho’s architect stamp rule is Idaho Code § 54-304 (Architect's seal), administered by the Board of Architects and Landscape Architects, a different body from the engineering board. The seal must carry “licensed architect, state of Idaho”, and no diameter is prescribed. Idaho Code § 54-304 states no dimension, and IDAPA 24.01.01, the rule chapter to which the statute delegates the design, contains no seal rule at all.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Idaho requirements section on this page.
Idaho Code § 54-304 (Architect's seal) governs the Idaho architect’s seal but does not prescribe a diameter. Sizes quoted for Idaho elsewhere generally come from stamp suppliers’ catalogues rather than from the rule. What the rule does require is that your name and license number stay clearly legible.
The Board of Architects and Landscape Architects, not the Board of Licensure of Professional Engineers and Professional Land Surveyors — and Idaho reverses the usual pattern here. The engineer and land surveyor seal design is delegated to their board by Idaho Code § 54-1215(3)(e) and no specification has ever been published, while the architect's wording is fixed in the statute itself by Idaho Code § 54-304(1). The architect is the only one of the three professions whose seal contents an Idaho licensee can read for themselves in the code. (Idaho Code § 54-304(1); § 54-1215(3)(e))
Idaho never says. Idaho Code § 54-304 states no dimension, and § 54-304(2) closes with "The design and use of the seal shall be as required by board rule" — but the Board of Architects and Landscape Architects has adopted no seal rule to receive that delegation. IDAPA 24.01.01 runs to Sections 000, 001, 100, 200 and 400 — legal authority, scope, licensure, practice standards and fees — and the word "seal" appears nowhere in the chapter. The four elements the statute names are therefore the whole specification: no diameter, no layout, no lettering. (Idaho Code § 54-304(2); IDAPA 24.01.01)
No. Idaho Code § 54-304(1) requires the impression to contain the name and Idaho architect license number of the architect and the words "licensed architect" and "state of Idaho". The two phrases are quoted separately and joined by "and", so both are required and a seal carrying only "licensed architect" is short of the statute. The enacted text prints both phrases in lower case, and the number named is the Idaho architect license number, not a number issued anywhere else. (Idaho Code § 54-304(1))
Five years' worth, available to the board on request. Idaho Code § 54-304(4) allows an architect to seal submissions prepared by another architect licensed in Idaho whose work has been reviewed and either coordinated or integrated, and prototypical building documents prepared by an architect licensed in any state who holds the NCARB certificate, where the work has been reviewed and integrated. Section 54-304(6) then requires adequate and complete records showing the nature and extent of the architect's control over work prepared by persons not regularly employed in the resident office, or of the review and integration of another architect's work and that it met the required standard of care, to be maintained for at least five years following the signing and sealing. (Idaho Code § 54-304(4), (6))
