Your board-compliant seal will be ready for download after purchase
Board approved
Your Wyoming Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601. Fill in your details and download it in seconds.
Chapter 5 of the engineering board's rules was last amended 3 September 2021, and its Section 2, headed "Sizes", governs sheet dimensions rather than seal diameter — the seal is dimensioned in Section 1(a). Every version of that chapter in force between 1 July 2013 and 24 March 2020 prescribed no dimensions at all; the 24 March 2020 amendment restored the 1¾-inch and 1¼-inch figures the rules had carried before the 2013 rewrite. The architects board renumbered Chapter 9 on 17 December 2025: the seal design is now Section 2, where earlier guidance cites Section 1, and Section 1 is now a bare authority provision. Seals authorized before 1 July 2013 may still be used, and the architects board still accepts its 2011 and 2001 seal designs for anyone licensed before 17 December 2025 and its 1992 design for anyone licensed before 27 April 2001. Landscape architects are licensed by the architects board and seal under the same Chapter 9, reading "LICENSED LANDSCAPE ARCHITECT-STATE OF WYOMING" in place of the architect legend.
Full Wyoming Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Wyoming Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Wyoming digital land surveyor stamps and seals.
Once you are licensed in Wyoming, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601, which is the provision the Wyoming Board of Professional Engineers and Professional Land Surveyors will measure the seal against.
Wyoming’s land surveyor seal rule is Wyo. Code R. 037.0001.5 § 1 (Board rules ch. 5, Practice of Professional Engineering and Professional Land Surveying, Seals); Wyo. Stat. § 33-29-601, administered by the Wyoming Board of Professional Engineers and Professional Land Surveyors. The seal must carry any one of “Professional Land Surveyor”, “Professional Engineer & Land Surveyor”, and two concentric circles, the outer circle 1¾ inches in diameter and the inner circle 1¼ inches.
A further 5 requirements, each tied to the subsection that imposes it, are itemised in the Wyoming requirements section on this page.
Two concentric circles, the outer circle 1¾ inches in diameter and the inner circle 1¼ inches. This is set by Wyo. Code R. 037.0001.5 § 1(a).
One of three phrases, and it follows the license held. Wyo. Code R. 037.0001.5 § 1(a) permits "Professional Engineer", "Professional Land Surveyor" and "Professional Engineer & Land Surveyor" and nothing else, so the phrase on the seal follows the credential held rather than being a free choice among the three. The same license-follows-the-credential logic runs through the chapter: § 4(a) has professional land surveyors, and professional engineers and land surveyors engaged in the practice of land surveying, use metallic identifying markers showing the Wyoming license number prefixed by LS, PLS or PE & LS as appropriate. Those prefixes are the marker's wording, not the seal's — no abbreviation is one of the three phrases § 1(a) allows on the seal. (Wyo. Code R. 037.0001.5 § 4(a); § 1(a))
In Section 1(a) of Chapter 5 — not in the section headed "Sizes". Section 2 of the same chapter reads, in full, that "[t]he dimensions of all hardcopy maps, plats, plans, and designs for filing or recording shall be as specified by the private or governmental entity requiring the documents": that is sheet size, and the entity requiring the document sets it. The seal's geometry is back in Section 1(a), which fixes two concentric circles with the outer at 1¾ inches and the inner at 1¼ inches. A citation to Chapter 5, Section 2 for seal diameter is a citation to the sheet-size rule. (Wyo. Code R. 037.0001.5 §§ 1(a), 2)
If it was authorized before 1 July 2013, yes: Wyo. Code R. 037.0001.5 § 1(b) provides that seals authorized prior to July 1, 2013 may continue to be used, and sets no date by which such a seal must be replaced. The grandfather clause matters here because the chapter's dimensions came and went. Every version in force from 1 July 2013 until the amendment effective 24 March 2020 described the seal only as two concentric circles and gave no dimensions at all; the 1¾-inch and 1¼-inch figures now in Section 1(a) were restored by that 2020 amendment, and they are what a seal procured today is measured against. (Wyo. Code R. 037.0001.5 § 1(a), (b))
Nearly every public filing, with one carve-out written into the same sentence. Wyo. Stat. § 33-29-801(a) reaches all maps, plats, plans, designs and all other engineering and surveying documents required to be filed or recorded in the state engineer's office, the office of state lands and investments, all county clerks' offices, all city or town offices, "or any other office of public record in the state of Wyoming", and § 33-29-801(a)(i) requires each to be made by or under the responsible charge of a professional engineer or professional land surveyor and to be signed by and bear that licensee's seal. The exception is filings with the oil and gas commission made pursuant to the rules of that commission, which the subsection places outside the requirement. (Wyo. Stat. § 33-29-801(a), (a)(i))
