Your board-compliant seal will be ready for download after purchase
Board approved
Your Utah Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in Utah Admin. Code R156-22-601 (Seal Requirements). Fill in your details and download it in seconds.
R156-22-601 states a minimum diameter and nothing else; the "maximum 2 inches" figure circulated for Utah is in no part of the rule. The agency is now the Division of Professional Licensing (DOPL); the older name Division of Occupational and Professional Licensing survives only in the legacy heading of the R156 code title.
Full Utah Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Utah Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Utah digital land surveyor stamps and seals.
Once you are licensed in Utah, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Utah Admin. Code R156-22-601 (Seal Requirements), which is the provision the Professional Engineers and Professional Land Surveyors Licensing Board will measure the seal against.
Utah’s land surveyor seal rule is Utah Admin. Code R156-22-601 (Seal Requirements), administered by the Professional Engineers and Professional Land Surveyors Licensing Board. The seal must carry “Professional Land Surveyor”, and circular, 1-1/2 inches minimum diameter. The rule states no maximum.
A further 2 requirements, each tied to the subsection that imposes it, are itemised in the Utah requirements section on this page.
Circular, 1-1/2 inches minimum diameter. The rule states no maximum. This is set by R156-22-601(1)(a).
The engineers' rule. Utah has no separate surveying seal provision: R156-22-601 covers the professional engineer, the professional structural engineer and the professional land surveyor together, and the surveyor's seal carries the licensee's name, license number, "State of Utah" and the words "Professional Land Surveyor". Nothing in the rule authorizes "Licensed Land Surveyor", "Registered Land Surveyor" or the abbreviation P.L.S. in that position. (R156-22-601(1)(b))
There is not. The rule requires a circular seal of 1-1/2 inches minimum diameter and stops there; the two-inch ceiling widely quoted for Utah appears in no part of R156-22-601. Small is the direction the rule polices, not large. (R156-22-601(1)(a))
Across the face of each seal imprint. The rule is specific about position, so a signature and date set into a certificate panel beside the seal on a plat do not satisfy it, and neither does a date typed into the title block. Each original set must additionally carry the original seal imprint, the original signature and the date on the cover or title sheet. (R156-22-601(1)(c)-(d))
A longer list than "plans". The sealing duty attaches to all final plans, specifications, reports, maps, sketches, surveys, drawings, documents and plats prepared by the licensee or under the licensee's supervision — a final map or sketch is named in the rule alongside the plat. Copies of a sealed original set are permitted provided the seal, signature and date are clearly recognizable. (R156-22-601(1), (1)(h))
