Your board-compliant seal will be ready for download after purchase
Board approved
Your Texas Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 22 TAC § 138.31 (Seal Specifications). Fill in your details and download it in seconds.
Texas is one of the few states where the board publishes the seal artwork itself and warns that a non-compliant seal is an enforcement matter. Note that the size rule is a ceiling, not a floor.
Full Texas Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Texas Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Texas digital land surveyor stamps and seals.
Once you are licensed in Texas, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 22 TAC § 138.31 (Seal Specifications), which is the provision the Texas Board of Professional Engineers and Land Surveyors will measure the seal against.
Texas’ land surveyor seal rule is 22 TAC § 138.31 (Seal Specifications), administered by the Texas Board of Professional Engineers and Land Surveyors. The seal must carry any one of “Professional Land Surveyor”, “Licensed State Land Surveyor”, and no larger than two inches. As with the engineer's seal this is a ceiling, not a floor; the surveyor's name and number must be clearly legible at whatever size is used.
A further 5 requirements, each tied to the subsection that imposes it, are itemised in the Texas requirements section on this page.
No larger than two inches. As with the engineer's seal this is a ceiling, not a floor; the surveyor's name and number must be clearly legible at whatever size is used. This is set by 22 TAC § 138.31(b).
No. The Board-authorized registered professional land surveyor design is a polygon, not a circle: "STATE OF TEXAS" across the top, "REGISTERED" on an inner arc with a small star, the surveyor's name in a center banner, the registration number below it, and "PROFESSIONAL LAND SURVEYOR" across the bottom. Because the design is not circular, the size limit is written without the word diameter — seals "shall be no larger than two inches" — and there is no minimum, only the requirement that the surveyor's name and number stay clearly legible. (22 TAC § 138.31(b))
It cannot. "R.P.L.S." is a designation the surveyor may use when signing surveying work, and it appears nowhere in the Board-authorized design. The seal carries the words "REGISTERED" and "PROFESSIONAL LAND SURVEYOR" instead, and using a seal that does not comply with § 138.31 is itself a violation of Board rules and subject to sanctions. (22 TAC § 138.31(b), (f); § 138.33(o))
Yes. On issuance of a licensed state land surveyor license the holder is required to obtain an additional seal, and its Board-authorized design is circular — "LICENSED STATE LAND SURVEYOR" around a large Texas star lettered T-E-X-A-S. That design shows no name and no number, which is why state land surveying documents submitted to the General Land Office must be signed and sealed with the LSLS seal and also carry the licensee's printed name and license number. (22 TAC § 138.31(h); § 138.33(n))
It must not be. Preliminary documents released from a land surveyor's control shall not be signed or sealed; instead they bear, in the signature space or on the face of the document, the statement "Preliminary, this document shall not be recorded for any purpose and shall not be used or viewed or relied upon as a final survey document", together with the purpose of the document, the land surveyor of record, that surveyor's registration number and the release date. Stamping a preliminary plat "for reference" is the habit this provision forecloses. (22 TAC § 138.33(e))
No. Section 138.31(e) prohibits preprinting blank forms with a surveyor's seal and prohibits the use of a decal or other seal replica, so a seal image parked in a title-block template or a sheet border ahead of the work is the practice the rule forecloses — as are the pressure-sensitive seal stickers that circulate for recorded plats. What § 138.31(c) allows is breadth of method: an electronic seal is unobjectionable, as is a rubber stamp, and a physical seal is acceptable only if it leaves a permanent ink image or permanent impression attached to the surveying work. (22 TAC § 138.31(c), (e))
