Your board-compliant seal will be ready for download after purchase
Board approved
Your Tennessee Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording and the layout set out in Rule 0120-02-.08 (Seals). Fill in your details and download it in seconds.
The 1⅝-to-1⅞-inch range quoted for Tennessee has no source in the rules: the words "inch", "diameter" and "size" appear nowhere in chapters 0120-01 or 0120-02. The two-inch figure belongs to the land surveyor rule. The Secretary of State still publishes the rule-maker as the State Board of Architectural and Engineering Examiners (Title 0120), while the board's own page uses the name State Board of Examiners for Architects, Engineers, and Land Surveyors.
Full Tennessee Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Tennessee Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Tennessee digital architect stamps and seals.
Once you are licensed in Tennessee, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Rule 0120-02-.08 (Seals), which is the provision the State Board of Examiners for Architects, Engineers, and Land Surveyors will measure the seal against.
Tennessee’s architect stamp rule is Rule 0120-02-.08 (Seals), administered by the State Board of Examiners for Architects, Engineers, and Land Surveyors. The seal must carry “REGISTERED ARCHITECT”, and the rule prescribes the seal by illustration and states no diameter.
A further 3 requirements, each tied to the subsection that imposes it, are itemised in the Tennessee requirements section on this page.
Rule 0120-02-.08 (Seals) governs the Tennessee architect’s seal but does not prescribe a diameter. Sizes quoted for Tennessee elsewhere generally come from stamp suppliers’ catalogues rather than from the rule. What the rule does require is that your name and license number stay clearly legible.
Yes, and only that. Rule 0120-02-.08(1) prescribes each seal by picture rather than by words, and the architect's picture at (1)(b) carries "REGISTERED ARCHITECT" on the inner band. "Licensed Architect", a plain "Architect" and "R.A." appear nowhere in the chapter, so an architect who brings a stamp in from another state usually has the wrong legend rather than the wrong layout. (Rule 0120-02-.08(1)(b))
The Great Seal of Tennessee device — the group lettered "AGRICULTURE" above the riverboat group lettered "COMMERCE". Because Tennessee prescribes the architect's seal by illustration rather than by a list of contents, that artwork is part of the required design and a ring of type on its own does not reproduce it. Around the device, the registrant's name arcs the top of the outer band and "STATE OF TENNESSEE" arcs the bottom, with "No." and the license number beneath the center — the reverse of the arrangement most states use. (Rule 0120-02-.08(1)(b))
None is stated anywhere. The words "inch", "diameter" and "size" do not appear in the chapter that governs architects, so the 1⅝-to-1⅞-inch range quoted for Tennessee has no source; neither does the two-inch figure, which belongs to the land surveyors' separate chapter and a different profession. What an architect's stamp has to satisfy is conformity to the prescribed illustration. (Rule 0120-02-.08(1)(b); cf. Rule 0820-04-.08(2))
Across it. Chapter 0120-02 applies by its own terms to any person registered to practice architecture, so this is the architect's provision and not a borrowed one: the registrant superimposes the signature — not a rubber stamp — and the date of signature across the face and beyond the circumference of the seal. Only an electronically generated signature and date may instead be placed adjacent to the seal; the handwritten provision offers no adjacent option, so a date parked in the title block does not satisfy it. (Rule 0120-02-.08(3), (8)(b); Rule 0120-02-.01(1))
