Your board-compliant seal will be ready for download after purchase
Board approved
Your New Mexico Professional Engineer seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 16.39.3.12 NMAC (Seal of Licensee); NMSA 1978 §§ 61-23-19(A) and (B), 61-23-21(B). Fill in your details and download it in seconds.
The engineering and surveying board's legal name is the "state board of licensure for professional engineers and professional surveyors" (NMSA 1978 § 61-23-5(A); 16.39.1.8(A) NMAC); its own website styles it "New Mexico Board of Licensure for Professional Engineers & Professional Surveyors". NMAC prints the engineer and surveyor legends in lower case — "professional engineer", "professional surveyor" — while capitalizing "New Mexico" in the same sentence; the rule prescribes the words and does not address letter case. Do not copy 16.39.1.8(B) NMAC, which describes an embossed 1¾-inch seal of two concentric circles reading "state of New Mexico": that is the board's own official seal, not a licensee's. Engineers and surveyors licensed before the current rules who have kept the license without lapse may retain a previously approved seal (16.39.3.12(D), 16.39.5.11(D) NMAC). Both seal sections were last amended 12/16/2022 and remain the current text; the statute behind them has since moved ahead of the rule, in that NMSA 1978 §§ 61-23-19(B) and 61-23-27.8(B) now let the board "approve alternative authentications to physical or electronic seals", wording that 16.39.3.3 NMAC still quotes in its older, shorter form.
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital New Mexico PE stamp generator creates instant state-approved electronic pe stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about New Mexico digital engineer stamps and seals.
Once you are licensed in New Mexico, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 16.39.3.12 NMAC (Seal of Licensee); NMSA 1978 §§ 61-23-19(A) and (B), 61-23-21(B), which is the provision the State Board of Licensure for Professional Engineers and Professional Surveyors will measure the seal against.
New Mexico’s PE seal rule is 16.39.3.12 NMAC (Seal of Licensee); NMSA 1978 §§ 61-23-19(A) and (B), 61-23-21(B), administered by the State Board of Licensure for Professional Engineers and Professional Surveyors. The seal must carry “professional engineer”, and three concentric circles — the outermost 1½ inches in diameter, the middle 1 inch and the innermost ½ inch. Paragraph (2) allows a board-approved alternative design instead, and that option prescribes no diameter at all, only text no less than 0.1 inches in height.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the New Mexico requirements section on this page.
Three concentric circles — the outermost 1½ inches in diameter, the middle 1 inch and the innermost ½ inch. Paragraph (2) allows a board-approved alternative design instead, and that option prescribes no diameter at all, only text no less than 0.1 inches in height. This is set by 16.39.3.12(C)(1) NMAC.
The engineer's and surveyor's seals carry "New Mexico", not "State of New Mexico". Only the architect's seal uses "STATE OF NEW MEXICO", and it sits on the upper arc rather than in a ring of its own. (16.39.3.12(C)(1) NMAC; 16.39.5.11(C)(1) NMAC; 16.30.3.18(A) NMAC)
There is no 1½-to-2-inch range in New Mexico. The engineer's and surveyor's seals are 1½ inches across the outermost circle and the architect's is 1¾ inches — each a single prescribed figure, not a permitted span. (16.39.3.12(C)(1) NMAC; 16.39.5.11(C)(1) NMAC; 16.30.3.18(A) NMAC)
Both prescribed designs spell the title out. "P.E." and "P.S." are not among the elements the rule lists, and the surveyor's words are "professional surveyor" — not "professional land surveyor", which is the wording used in neighboring states. (16.39.3.12(C) NMAC; 16.39.5.11(C) NMAC)
The engineer's and surveyor's seals have three concentric circles, and the license number goes in the center circle rather than beneath the name. A two-circle seal is not the prescribed design and would need board approval as an alternative under Paragraph (2). (16.39.3.12(C) NMAC; 16.39.5.11(C) NMAC)
A document an engineer or surveyor signs with a digital signature must itself carry an authentication procedure and a list of the hardware, software and parameters used to prepare it. This is the board policy that 16.39.3.12(A) NMAC refers to, and it asks for more than the seal and signature alone. (Advisory Opinions - Engineering & Surveying (updated 7/12/2024), PE/PS Advisory: Signatures/Electronic Signatures [approved 11/2/01])
