Your board-compliant seal will be ready for download after purchase
Board approved
Your Nebraska Architect seal from pedigitalstamps.com meets every requirement on this page — the required wording and the layout set out in 110 Neb. Admin. Code ch. 6, Rule 6.1 (Use of the Seal); Neb. Rev. Stat. § 81-3437.01. Fill in your details and download it in seconds.
Rule 6.1.6 still reads "signed across the face of the seal," wording that predates the 2026 amendment of § 81-3437.01(2). The statute now permits the signature and date across or adjacent to the seal, and the statute controls; as of August 2026 the Board had not conformed the rule text.
Full Nebraska Architect seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Nebraska Architect stamp generator creates instant state-approved electronic architect stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Nebraska digital architect stamps and seals.
Once you are licensed in Nebraska, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 110 Neb. Admin. Code ch. 6, Rule 6.1 (Use of the Seal); Neb. Rev. Stat. § 81-3437.01, which is the provision the State of Nebraska Board of Engineers and Architects will measure the seal against.
Nebraska’s architect stamp rule is 110 Neb. Admin. Code ch. 6, Rule 6.1 (Use of the Seal); Neb. Rev. Stat. § 81-3437.01, administered by the State of Nebraska Board of Engineers and Architects. The seal must carry “Architect”, and no diameter is prescribed. The Board states that it does not require a certain size or diameter; the seal must be legible however it is applied.
A further 3 requirements, each tied to the subsection that imposes it, are itemised in the Nebraska requirements section on this page.
110 Neb. Admin. Code ch. 6, Rule 6.1 (Use of the Seal); Neb. Rev. Stat. § 81-3437.01 governs the Nebraska architect’s seal but does not prescribe a diameter. Sizes quoted for Nebraska elsewhere generally come from stamp suppliers’ catalogues rather than from the rule. What the rule does require is that your name and license number stay clearly legible.
Neither. Neb. Rev. Stat. § 81-3437.01(1) puts four things on the seal — State of Nebraska, the licensee's name, the license number, and the word Architect — and the Board lists seals identifying an architect as "REGISTERED ARCHITECT" or "REGISTERED PROFESSIONAL ARCHITECT" as not compliant with the Act. "Licensed Architect" is the wording of the certificate of licensure under § 81-3437(1), a different section governing a different document. The Board's published layout puts "ARCHITECT" at the top of the seal and "STATE OF NEBRASKA" at the bottom. (Neb. Rev. Stat. §§ 81-3437.01(1), 81-3437(1); Board licensee seal guidance)
From the Board. The statute leaves the design of the seal to the Board, and the Board sends each newly licensed architect a seal letter showing the approved design along with the statutory requirements for its use. The Board states that seals must include other design elements as shown on that letter — so the four items named in § 81-3437.01(1) are the required wording, not the complete artwork, and a seal drawn only from the statute may still not match what the Board approved. The Board does allow a middle initial in place of the full middle name, and permits the seal to be affixed in any color so long as it is legible. (Neb. Rev. Stat. § 81-3437.01(1); Board licensee seal guidance)
The first and the last. Rule 6.1.5 requires specifications, reports, studies and other documents prepared as architectural services to be sealed on the title page and/or the first page as well as the last page of the document — a back-of-the-book seal that most jurisdictions never ask for. Rule 6.1.5.1 offers relief on large specifications involving several licensees: rather than coordinate the first and last page of every section, the architect may affix the seal on separate sheets placed at both the front and the back of the specification, listing each section the architect prepared. Drawings follow a different rule again — the seal goes on each sheet of the originals. (110 Neb. Admin. Code ch. 6, Rules 6.1.5, 6.1.5.1, 6.1.4)
There is no Nebraska seal to use. Neb. Rev. Stat. § 81-3437.01(5) directs a temporary permit holder to use the seal of his or her state of licensure and to affix the signature and the temporary permit to all the work, and the Board supplies a template to sit beside that seal, carrying the permit holder's name, temporary permit number, expiration date, state of licensure and license number, and the project name. The out-of-state seal is only half the requirement — without the Board's template beside it the documents are not properly sealed for the Nebraska project. (Neb. Rev. Stat. § 81-3437.01(5); Board licensee seal FAQ (Licensee Seal; Temporary Permits))
Either, since the 2026 amendment. Neb. Rev. Stat. § 81-3437.01(2), as amended by LB1212, places the licensee's signature and the date of the seal's application across or adjacent to the seal, in a manner that does not obscure the licensee's name or the license number. The Board's own Rule 6.1.6 still reads "signed across the face of the seal", and the Board's guidance still describes that placement, adding that where signing across renders the seal, signature or date illegible the licensee should use professional judgment so that all three appear as one unit and are legible. Note also what is dated: the date of the seal's application, not the date the drawing was produced. (Neb. Rev. Stat. § 81-3437.01(2), Laws 2026, LB1212, § 10; 110 Neb. Admin. Code ch. 6, Rule 6.1.6; Board licensee seal guidance)
