Your board-compliant seal will be ready for download after purchase
Board approved
Your Maine Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 02-360 C.M.R. Ch. 50 §6 (Seals for Professional Land Surveyors); 32 M.R.S. §18226. Fill in your details and download it in seconds.
Sources that call Maine's seal size unregulated are reading only 02-322 C.M.R. Ch. 2 §9, which delegates size and design to the Board rather than stating a number. The Board then prescribes 1-3/4 inches on its Approved Seal Format page. No architect entry appears below: 32 M.R.S. §225 leaves the architect's seal design entirely to the architects' board, and that board publishes no seal-design specification, so the "Licensed Architect" seal sold by vendors has no primary source behind it.
Full Maine Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Maine Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Maine digital land surveyor stamps and seals.
Once you are licensed in Maine, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 02-360 C.M.R. Ch. 50 §6 (Seals for Professional Land Surveyors); 32 M.R.S. §18226, which is the provision the Board of Licensure for Professional Land Surveyors will measure the seal against.
Maine’s land surveyor seal rule is 02-360 C.M.R. Ch. 50 §6 (Seals for Professional Land Surveyors); 32 M.R.S. §18226, administered by the Board of Licensure for Professional Land Surveyors, a different body from the engineering board. The seal must carry “Professional Land Surveyor”, and circular, with an outside diameter of not less than 1½ inches. The rule sets no maximum.
A further 3 requirements, each tied to the subsection that imposes it, are itemised in the Maine requirements section on this page.
Circular, with an outside diameter of not less than 1½ inches. The rule sets no maximum. This is set by 02-360 C.M.R. Ch. 50 §6.
Circular, with an outside diameter of not less than 1½ inches — a floor with no ceiling. 02-360 C.M.R. Ch. 50 § 6 fixes the shape as well as the minimum, so a Maine surveyor's seal cannot be an oval or a rectangle, and nothing stops it from being larger than 1½ inches. The 1-3/4 inch figure known as Size #1 is the engineering board's Approved Seal Format under 02-322 C.M.R. Ch. 2 § 9(1) and does not set the surveyor's size. (02-360 C.M.R. Ch. 50 § 6)
Not as part of ordinary sealing. 02-360 C.M.R. Ch. 50 § 6 requires the professional land surveyor to sign and seal and/or emboss every final document, and lists what the seal must plainly set forth — the surveyor's full name, the license number, and the words "State of Maine" and "Professional Land Surveyor". No date appears in that list or in the signing requirement. The rule that pairs a date with the seal, 02-322 C.M.R. Ch. 2 § 9(3), is the engineering board's. The one place Maine requires a date from a surveyor is on an altered document under 32 M.R.S. § 18226(1)(B). (02-360 C.M.R. Ch. 50 § 6; 32 M.R.S. § 18226(1)(B))
By adding four things, not simply a second seal. 32 M.R.S. § 18226(1)(B) provides that if an item bearing the seal of a professional land surveyor is altered, the altering professional land surveyor's seal and signature must be affixed with the notation "altered by," the date and a specific description of the alteration. A revised plan that carries only the second surveyor's seal and signature, with no notation and no description of what was changed, does not meet the statute. (32 M.R.S. § 18226(1)(B))
Yes. Both the rule and the statute reach past plats. 02-360 C.M.R. Ch. 50 § 6 requires the surveyor to sign and seal and/or emboss every final document, "including but not limited to plans, descriptions, reports, maps, plats and other drawings", and 32 M.R.S. § 18226(1)(A) repeats that list for all final documents issued by the surveyor. A metes-and-bounds description issued as completed work is therefore a sealed document in its own right, and § 18226(1)(C) forbids any state, county, city, town or village official charged with enforcement from accepting or approving documents prepared within the chapter that are not sealed and signed by the surveyor in responsible charge. (02-360 C.M.R. Ch. 50 § 6; 32 M.R.S. § 18226(1)(A) and (C))
The Board of Licensure for Professional Land Surveyors — a third Maine board, separate both from the State Board of Licensure for Professional Engineers, whose rules are agency 02-322, and from the architects' board at 02-288. The surveyors' chapter is 02-360 C.M.R. Ch. 50, adopted under 32 M.R.S. § 18212, and it was repealed and replaced effective January 18, 2026; it is now titled "Qualification for Licensure as Professional Land Surveyor and Use of Seals", with the seal provision at Section 6. Citations that route a Maine surveyor's seal through the engineering board's Chapter 2 are pointing at the wrong agency. (02-360 C.M.R. Ch. 50 § 6 (repealed and replaced Jan. 18, 2026, filing 2026-002); 32 M.R.S. § 18212)
