Your board-compliant seal will be ready for download after purchase
Board approved
Your Indiana Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the required wording, the layout and the diameter set out in 865 IAC 1-7-1 (Design and contents of seal); 865 IAC 1-7-2 (Application of seal; signature); 865 IAC 1-7-4 (Use of electronic or digital signatures); IC 25-21.5-9-1. Fill in your details and download it in seconds.
Indiana splits the three professions across three boards, all administered by the Indiana Professional Licensing Agency: engineers under 864 IAC 1.1, architects and landscape architects under 804 IAC 1.1, and surveyors under 865 IAC 1. Each of the three seal rules prescribes its design by incorporating a picture rather than by listing words, so the wording has to be read off the figure: all three figures carry "REGISTERED", "No." above a rule line, "STATE OF" and "INDIANA" inside the inner circle in addition to the profession wording in the outer band. The legend recorded here for each profession is the profession wording its own source fixes — "professional engineer" by statute for engineers, "registered architect" by statute for architects, and "LAND SURVEYOR" from the figure for surveyors, whose statute prescribes no wording at all. Only the surveyor rule regulates electronic signatures in detail — 865 IAC 1-7-4(c) demands unique identification, verifiability, direct control and a retained permanent digital copy — while the engineer rule accepts an electronic signature with no such conditions and the architect rule still speaks of the person's "original signature" beside the seal. Because 864 IAC 1.1-7-2, 1.1-7-3 and 1.1-7-4 were renumbered by the Legislative Services Agency as 865 IAC 1-7-1, 1-7-2 and 1-7-3 when surveyors were separated from the engineers' title, older material citing "864 IAC 1.1-7" for a surveyor's seal now points at the engineer rule; the code's chapter heading at IC 25-21.5-2 likewise still reads "State Board of Registration for Land Surveyors" even though IC 25-21.5-2-1 establishes the state board of registration for professional surveyors. Rule text here was read in the 2026 Edition of the Indiana Administrative Code and in the 2026 Indiana Code.
Full Indiana Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Indiana Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Indiana digital land surveyor stamps and seals.
Once you are licensed in Indiana, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows 865 IAC 1-7-1 (Design and contents of seal); 865 IAC 1-7-2 (Application of seal; signature); 865 IAC 1-7-4 (Use of electronic or digital signatures); IC 25-21.5-9-1, which is the provision the State Board of Registration for Professional Surveyors will measure the seal against.
Indiana’s land surveyor seal rule is 865 IAC 1-7-1 (Design and contents of seal); 865 IAC 1-7-2 (Application of seal; signature); 865 IAC 1-7-4 (Use of electronic or digital signatures); IC 25-21.5-9-1, administered by the State Board of Registration for Professional Surveyors, a different body from the engineering board. The seal must carry “LAND SURVEYOR”, and the land surveyor seal shall be not less than 1⅝ inches or more than 1⅞ inches in outside diameter.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Indiana requirements section on this page.
The land surveyor seal shall be not less than 1⅝ inches or more than 1⅞ inches in outside diameter. This is set by 865 IAC 1-7-1(a).
The surveyor's seal reads "LAND SURVEYOR", not "Professional Surveyor", even though the board that issues it is the State Board of Registration for Professional Surveyors and the statute calls the licensee a professional surveyor. (865 IAC 1-7-1(a))
No, it says "LAND SURVEYOR". The design incorporated at 865 IAC 1-7-1(a) puts the registrant's name across the top of the outer band and "LAND SURVEYOR" across the bottom, and no statute prescribes any other wording — IC 25-21.5-9-1 grants only the authority to use "a seal of a design authorized by the rules of the board". The title moved on and the seal did not: IC 25-21.5-2-1 establishes the state board of registration for professional surveyors, and that is the board whose rule keeps "LAND SURVEYOR" on the seal. (865 IAC 1-7-1(a); IC 25-21.5-9-1; IC 25-21.5-2-1)
No, and following that citation lands you on the engineers' rule. 864 IAC 1.1-7-2, 1.1-7-3 and 1.1-7-4 were renumbered by the Legislative Services Agency as 865 IAC 1-7-1, 1-7-2 and 1-7-3 when surveyors were separated from the engineers' title, so older material citing "864 IAC 1.1-7" for a surveyor's seal now points at a different provision with different signature and electronic-signature terms. The surveyors' rules are 865 IAC 1, made under IC 25-21.5. (865 IAC 1-7-1 (Legislative Services Agency renumbering note); 864 IAC 1.1-7-2)
The surveyor's rule grants no permission to. 865 IAC 1-7-1(c) requires the name and registration number inscribed on the seal to correspond to the name and certificate number inscribed on the certificate of registration, and states no exception. The other two Indiana rules do state one: 864 IAC 1.1-7-2(c) expressly permits the letters "PE" to be excluded from an engineer's certificate number and 804 IAC 1.1-2-7(c) permits "AR" to be excluded from an architect's. The surveyors' subsection has no equivalent sentence. (865 IAC 1-7-1(c); 864 IAC 1.1-7-2(c); 804 IAC 1.1-2-7(c))
More than the other two professions. 865 IAC 1-7-4(c) permits an electronic signature and seal in place of an original only where they uniquely identify the registrant, are verifiable, and are attached to or associated with the electronic document in a manner that makes clear to the recipient that they represent the surveyor's signature and seal; the electronic signature is under the registrant's direct control; and the registrant maintains a permanent digital copy of the electronically transmitted document for future verification. That last condition is a record-keeping duty that outlives the transmission, and neither the engineers' rule nor the architects' imposes anything like it. (865 IAC 1-7-4(c))
Leaving the seal off is not enough on its own. 865 IAC 1-7-4(d) lets a registrant electronically transmit a document without affixing an electronic signature only if "Not a Certified Document" or "Pro Forma Survey", as appropriate, is inserted in place of the image of the seal, signature and date. The language is not required for documents sent to a commercial printer or blueprint service for reproduction, or to the registrant's own employer or employees. (865 IAC 1-7-4(d))
