Your board-compliant seal will be ready for download after purchase
Board approved
Your Idaho Land Surveyor seal from pedigitalstamps.com meets every requirement on this page — the layout set out in Idaho Code § 54-1215(3); IDAPA 24.32.01.200.01 (Practice Standards — Seals). Fill in your details and download it in seconds.
Idaho publishes no seal artwork for any of the three professions. Idaho Code § 54-1215(3)(e) hands the engineer and surveyor design to the board, and the board's only published statement about the wording is a June 2008 news bulletin announcing that the specification would move from "Registered" to "Licensed" on July 1, 2008; asked about the seal, the board's FAQ points licensees back to the letter the board sent when their license was issued. The 7-1-25 recodification of IDAPA 24.32.01 moved the seal rule from Section 012 to Section 200.01 and dropped the subsection headed "Standard Seals for Engineers and Land Surveyors" — and the board's FAQ still cites IDAPA 24.32.01.101.03, "Use of Seal on Documents," which the recodified chapter no longer contains. The contact block on the cover of that chapter prints the board's website as https://dopl.idaho.gov/pht/, which is the Physical Therapy Board; the working address is https://dopl.idaho.gov/ipels/, and the older ipels.idaho.gov host no longer resolves at all. Two articles in the board's own Ethics and Professional Practice Guidance Document, both carrying the same 07/10/2025 revision date, disagree about facsimile signatures: "Digital Signatures" lists "a facsimile image of the licensee's signature adjacent to or over an electronically generated stamp" as an allowable form since Senate Bill 1235, while "Stamping Practices" still says "you cannot use computer generated signatures and dates" and requires the licensee to personally sign and date each original. The statute itself no longer defines "signature" at all. For architects, Idaho Code § 54-304(2) provides that the design and use of the seal "shall be as required by board rule," but IDAPA 24.01.01 contains no seal rule, and the rulemaking pending before that board in 2026 adds one for certified interior designers only.
Full Idaho Land Surveyor seal requirements, with every citation →
File formats
HIGH-QUALITY RASTER FORMAT
VECTOR FORMAT, INFINITELY SCALABLE
UNIVERSAL DOCUMENT FORMAT
AUTOCAD COMPATIBLE FORMAT
PROFESSIONAL PRINT FORMAT
How it works
Select your state & profession
Add your name & license number
Adjust the text size using the controls
Select your discipline
Add your signature & customize (optional)
Download instantly to your computer
Software compatibility
Who we are
Our digital Idaho Land Surveyor stamp generator creates instant state-approved electronic land surveyor stamps. Our platform provides full customization of your digital seal, including an option to add your signature. Professional Engineer (PE) stamps, Architect stamps, and Land Surveyor stamps are available for immediate download after customization. There is no waiting. Every electronic professional seal we generate is 100% compliant with state board requirements, ensuring your digital stamp meets all necessary standards.
State boards
FAQ
Frequently asked questions about Idaho digital land surveyor stamps and seals.
Once you are licensed in Idaho, you can generate your seal here and download it immediately. Fill in the form and position your signature if you want one. The layout follows Idaho Code § 54-1215(3); IDAPA 24.32.01.200.01 (Practice Standards — Seals), which is the provision the Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors will measure the seal against.
Idaho’s land surveyor seal rule is Idaho Code § 54-1215(3); IDAPA 24.32.01.200.01 (Practice Standards — Seals), administered by the Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors. No diameter is prescribed. The land surveyor's seal is governed by the same statute and rule as the engineer's, and neither states a dimension.
A further 8 requirements, each tied to the subsection that imposes it, are itemised in the Idaho requirements section on this page.
Idaho Code § 54-1215(3); IDAPA 24.32.01.200.01 (Practice Standards — Seals) governs the Idaho land surveyor’s seal but does not prescribe a diameter. Sizes quoted for Idaho elsewhere generally come from stamp suppliers’ catalogues rather than from the rule. What the rule does require is that your name and license number stay clearly legible.
Nowhere. Idaho Code § 54-1215(3)(e) makes the design "as determined by the board", and the board has published no wording, no layout and no dimension — not in IDAPA 24.32.01, not in its guidance documents, and not on its website. Asked about the seal, the board's FAQ sends licensees back to the letter the board sent when the license was issued, and still cites IDAPA 24.32.01.101.03, "Use of Seal on Documents," a section the 7-1-25 recodification of that chapter no longer contains. The one documented element of the wording is that since July 1, 2008 the board's specification uses "Licensed" rather than "Registered", with seals prepared and approved before that date valid for continued use. (Idaho Code § 54-1215(3)(e); IDAPA 24.32.01.200.01.b; Board News Bulletin no. 41 (June 2008))
The board's own guidance answers both ways, in the same document. Under the heading "Digital Signatures", the Ethics and Professional Practice Guidance Document lists "[a] facsimile image of the licensee's signature adjacent to or over an electronically generated stamp" among the allowable forms, because Senate Bill 1235 removed the statutory definition of "signature" effective July 1, 2022. Under "Stamping Practices", the same document, carrying the same 07/10/2025 revision date, answers that "you cannot use computer generated signatures and dates", requires the licensee to personally sign and date each original, and calls pre-signed "sticky-backs" improper. For plats and records of survey the point is settled elsewhere in any event: Idaho Code §§ 50-1304(1) and 55-1905(1) both require that signatures be in reproducible black ink. (Ethics and Professional Practice Guidance Document, 07/10/2025, "Digital Signatures" and "Stamping Practices"; Idaho Code §§ 50-1304(1), 55-1905(1))
Where they come out of a field survey, yes. The board's guidance states that if right-of-way plans are the result of a field survey and the information derived from them is used to prepare legal descriptions for conveyances, the work falls within the statutory definition of the practice of professional land surveying, must be performed under the responsible charge of a licensed professional land surveyor, and the work product must be sealed, signed and dated by the professional in responsible charge. Plans of that kind are routinely produced inside engineering departments, which is exactly where the requirement gets missed. (Professional Land Surveying Guidance Document, 05/27/2026, "Right-of-Way Plans Require PLS")
